tunnel:If
A tunnel interface.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | naming:Descr1024 (string:Basic) |
Description | MAX SIZE: 1024 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operSt | tunnel:OperSt (scalar:Enum8) |
The runtime state of the routed VLAN interface. | SELECTION: 1 - up 2 - down DEFAULT: down |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| adminSt | tunnel:AdminSt (scalar:Enum8) |
The administrative state of the interface. | SELECTION: 1 - up 2 - down DEFAULT: up |
| cfgdMtu | tunnel:ConfMtu (scalar:Uint32) |
The routed VLAN interface configured maximum transmission unit (MTU). | RANGE: [1 , 9000] DEFAULT: 9000 |
| dest | address:Ip |
The transmission destination identifier. | Value must match ipv4 or ipv6 known format |
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| keepAlvIntvl | tunnel:KeepAlvIntvl (scalar:Uint32) |
The interval time between sending keepalive messages. | RANGE: [0 , 32767] DEFAULT: 10 |
| keepAlvRetries | tunnel:KeepAlvRetries (scalar:Uint32) |
The configured interval before sending another series of keep alive messages. | RANGE: [1 , 255] DEFAULT: 3 |
| mac | address:MAC |
The MAC address. | Value must match MM:MM:MM:SS:SS:SS format |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| src | address:Ip |
The source node IP address. | Value must match ipv4 or ipv6 known format |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| tLayer | tunnel:LayerT (scalar:Enum8) |
The layer for the tunnel interface. | SELECTION: 1 - l2 2 - l3 DEFAULT: l2 |
| tType | tunnel:TunnelQual (scalar:Enum8) |
The type of target. | SELECTION: 0 - unknown 1 - ivxlan 2 - vxlan DEFAULT: ivxlan |
| type | tunnel:EpT (scalar:Bitmask8) |
The specific type of the routed vlan interface. | SELECTION: 1 - physical 2 - virtual 4 - proxy-acast-v4 8 - proxy-acast-v6 16 - proxy-acast-mac 32 - multdst-repl DEFAULT: physical |
| vrfName | l3:VrfName (string:Basic) |
The interface VRF name. This name can be up to 64 alphanumeric characters. | A sequence of characters |